Recently I purchased an SSD for my wife’s Thinkpad. It wasn’t a big one, 256 gig, but her laptop is a little slow all around and the bottleneck seems to be mostly in the drive, which I am pretty sure is still old school spinning platters.
Unfortunately, the drive in her laptop is 320 Gb, so I couldn’t straight clone the drives. I could have done some partition size adjustments and made it work but she was already fussing and worrying I was going to lose some of her files so I decided I’d just wait and get a larger one later.
I’d already planned to pick up a second one of these drives to add to my Laptop. The main drive is one of those funky newer styles that’s basically a circuit board, but it has an empty bay for a laptop drive. I stuck the new SSD in and went about using it. Nothing hard here at all.
To my surprise, the drive vanished a week or so later. Thankfully I didn’t stick it in my wife’s laptop, it was apparently bad. Or was it?
Turns out that because the drive is a little on the small size, even for a 2.5″ drive, and there isn’t any mechanism inside the laptop to secure the drive itself, it ended up coming lose and losing it’s connection.
It’s probably not the cleanest fix, but I stripped off a half a sheet of paper and accordion folded it and slipped it in between the drive and the Laptop chassis. This applies pressure to the drive, holding it in place.
I haven’t had any trouble with the drive since. Still it’s kind of a crummy design.
Josh Miller aka “Ramen Junkie”. I write about my various hobbies here. Mostly coding, photography, and music. Sometimes I just write about life in general. I also post sometimes about toy collecting and video games at Lameazoid.com.